Star Micronics SLIP SP298 SERIES Programmer's Manual page 58

CODE
HEX
FUNCTION
<ESC> "#
1B 23
Sets the memory switch. In order to enable changed memory switch
setting, turn the printer OFF and ON again or send printer reset
command (<ESC> "?"<LF><NUL>") to the printer. Changed
memory switch settings are stored in EEPROM and these setting will
be stored as long as the time when they are changed again.
N :Memory switch number ("0", "1", "2", "3", "4", "5")
n1n2n3n4 :Mode settings (For details see below)
1) N=0
n1 :Always "0"
n2 :Always "0"
n3 :Always "0"
n4 :Always "0"
2) N=1 (Star mode only)
n1 :Always "0"
n2 :Always "0"
Parameter
n3 Zero style
n4 International character
set
n4 Country n4 Country
"0" USA "3" UK
"1" France "4" Denmark #1
"2" Germany "5" Sweden
n4 Country
"C" Latin America
N , n1n2n3n4"
N 2C n1n2n3n4
(Default)
Setting
Normal zero Slashed zero
n4 Country
"6" Italy
"7" Spain #1
"8" Japan
<LF>
0A
"0" "1"
See below
n4 Country
"9" Norway
"A" Denmark #2
"B" Spain #2
55
<NUL>
00