Star Micronics SLIP SP298 SERIES Programmer's Manual page 61

58
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
<ESC>"q" command function
n1
" "
Executes release
0
" "
Executes release
1
Executes release after the paper has been completely released in
" "
2
the forward direction
Executes release after the paper has been completely released in
" "
3
the reverse direction
<ESC> "@"
1B 40
Initializes printer
Reinitializes the printer. Clears the print buffer and returns settings
to their power-up values.
Does not clear the input buffer, downloaded characters, or conditions
for peripheral devices.
If this command is specified in page mode while printing using the
slip printer, printing is not carried out and the printer returns to line
mode from page mode.
This command cannot recover from errors or return to the on-line
status from off-line.
<ENQ>
05
Enquiry
Causes the printer to transmit a status byte.