Memory Settings Screen; Processor Settings Screen - Dell PowerEdge M820 Owner's Manual

Menu Item
System BIOS Version
System Service Tag
System Manufacturer
System Manufacturer Contact Information

Memory Settings Screen

Menu Item
System Memory Size
System Memory Type
System Memory Speed
System Memory Voltage Displays the system memory voltage.
Video Memory
System Memory Testing
Memory Operating Mode Specifies the memory operating mode. The options available depending on the memory
Node Interleaving
Serial Debug Output

Processor Settings Screen

Menu Item
Logical Processor
QPI Speed
14
Description
Displays the BIOS version installed on the system.
Displays the system Service Tag.
Displays the name of system manufacturer.
Displays the contact information of the system manufacturer.
Description
Displays the amount of memory installed in the system.
Displays the type of memory installed in the system.
Displays the system memory speed.
Displays the amount of video memory.
Specifies whether system memory tests are run during system boot. Options are Enabled
and Disabled. By default, the System Memory Testing option is set to Disabled.
configuration of your system are Optimizer Mode, Advanced ECC Mode, Mirror Mode,
Spare Mode, and Spare with Advanced ECC Mode. By default, the Memory Operating Mode
option is set to Optimizer Mode.
NOTE: The Memory Operating Mode can have different defaults and available options
based on the memory configuration.
If this field is Enabled, memory interleaving is supported if a symmetric memory
configuration is installed. If Disabled, the system supports Non-Uniform Memory
architecture (NUMA) (asymmetric) memory configurations. By default, Node Interleaving
option is set to Disabled.
By default, it is set to disabled.
Description
Allows you to enable or disable logical processors and display the number of logical
processors. If the Logical Processor option is set to Enabled, the BIOS displays all the
logical processors. If this option is set to Disabled, the BIOS only displays one logical
processor per core. By default, the Logical Processor option is set to Enabled.
Allows you to set the QuickPath Interconnect data rate settings. By default, the QPI Speed
option is set to Maximum data rate.
NOTE: The QPI Speed option is displayed only when both the processors are installed.