Dell PowerEdge M820 Owner's Manual page 115

Dell poweredge m820 systems owner's manual
Hide thumbs Also See for PowerEdge M820:
Table of Contents

Advertisement

Error Code Message Information
LCD Message System power exceeds capacity. Performance degraded. Check PSU configuration.
Details
Action
PWR1008
Message
LCD Message System power exceeds threshold. Performance degraded. Check PSU configuration.
Details
Action
RFM1003
Message
Removable Flash Media <
Details
The removable flash media is installed but improperly configured or failed to initialize.
Action
If unintended, reinstall the flash media and module.
RFM1005
Message Removable Flash Media <
Details
The media is being prepared or is under maintenance. If the problem persists, reinstall the
card.
Action
Wait for the media to be ready.
RFM1006
Message Removable Flash Media <
Details
At boot, the Card Identification (CID) signature of the card is different from the Non-volatile
(NV) storage value or the card is the destination of a copy operation that is in-progress.
Action
If unintended, reinstall the flash media.
RFM1008
Message
LCD Message
Details
Action
RFM1014
Message
LCD Message Removable Flash Media <
Details
Action
The system is currently operating in a performance degraded state to attempt protect
from a power shutdown.
Review system configuration, upgrade power supplies or reduce system power
consumption.
The system performance degraded because power draw exceeds the power threshold.
The power threshold is configured by the user or automatically by software based on
system configuration.
Review system configuration, upgrade power supplies or reduce system power
consumption.
name > is not IPMI-function ready.
name > is not ready.
name > is offline.
Failure detected on Removable Flash Media <
Removable Flash Media <
An error was reported during a SD card read or write.
Reseat the flash media, if the issue persists replace the media.
name > is write protected.
Removable Flash Media <
name > is write protected. Check SD Card.
The card is write-protected by the physical latch on the SD card. A write-protected
card cannot be used.
If unintended, remove the media and disable write protection.
name >.
name > failed. Check SD Card.
115

Advertisement

Table of Contents
loading

Table of Contents