Dell PowerEdge M820 Owner's Manual page 88

Error Code Message Information
CPU0001
Message
LCD Message CPU <
Details
Action
CPU0002
Message CPU <
Action
CPU0003
Message CPU <
Action
CPU0004
Message CPU <
Action
CPU0005
Message
LCD Message
Details
Action
CPU0006
Message Unrecoverable CPU complex error detected on CPU <
Details System is unable to boot or may run in a degraded state.
Action
88
CPU < number > has a thermal trip (over-temperature) event.
number > has a thermal trip. Check CPU heat sink.
The processor temperature increased beyond the operational range.
Review logs for fan failures, replace failed fans. If no fan failures are detected, check
inlet temperature (if available) and reinstall processor heat-sink.
number > has failed the built-in self-test (BIST).
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Make sure the processor is seated correctly.
3. If the issue persists, see
number > is stuck in POST.
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Reduce system configuration to minimum memory and remove all PCI devices. If
system completes POST, update system BIOS. reinstall memory and PCI one
component at a time to meet the original configuration.
3. If the issue persists, see
number > failed to initialize.
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Make sure the processor is seated correctly.
3. If the issue persists, see
number > configuration is unsupported.
CPU <
number > configuration is unsupported. Check CPU or BIOS revision.
CPU <
System is unable to boot or may run in a degraded state.
Review the technical specifcations for supported processor types.
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Make sure the processor is seated correctly.
3. If the issue persists, see
Getting Help.
Getting Help.
Getting Help.
number >.
Getting Help.