Dell PowerEdge M820 Owner's Manual page 123

Error Code Message Information
SEL1510
Message
Details
Action
SEL9900
Message An unsupported event occurred.
Details The current software version cannot decode this event. You may need to review this event
using a tool which displays raw data such as Ipmitool with the -vvv option or Racadm with
the -E option.
Action Upgrade the management software.
SWC4004
Message A firmware or software incompatibility detected between iDRAC in slot <
Details FlexAddress is not implemented in one of the versions of firmware.
Action Check the firmware versions of iDRAC and CMC. Update with the latest version.
SWC4006
Message A firmware or software incompatibility detected between system BIOS in slot <
CMC.
Details FlexAddress is not implemented in one of the versions of firmware.
Action Check the firmware versions of BIOS and CMC. Update with the latest version.
SWC4008
Message A firmware or software incompatibility detected between CMC 1 and CMC 2.
Details FlexAddress is not implemented in one of the versions of firmware. Please update the
firmware.
Action Check firmware versions. Update CMC 1 and CMC 2 firmware to match.
SWC5001
Message
Action
TMP0100
Message
LCD Message
Details
Action
TMP0101
Message
LCD Message
Details
Action
An authentication error detected for Chassis Group Member <
Group master CMC could not log into the group member CMC.
Check the login credentials of CMC.
name > upgrade failed.
<
Reboot the system and attempt the upgrade again.
name > temperature is less than the lower warning threshold.
The system board <
name > temperature is outside of range.
System board <
Ambient air temperature is too cool.
Check the system operating environment.
name > temperature is less than the lower critical threshold.
The system board <
name > temperature is outside of range.
System board <
Ambient air temperature is too cool.
Check the system operating environment.
number >.
number > and CMC.
number > and
123