Dell PowerEdge M820 Owner's Manual page 121

Dell poweredge m820 systems owner's manual
Hide thumbs Also See for PowerEdge M820:
Table of Contents

Advertisement

Error Code Message Information
SEL0010
Message Log is almost full.
Details
When the event log is full, additional events are not written to the log. Older events may be
overwritten and lost.
Action
Backup and clear log at the next maintained time.
SEL0012
Message Could not create or initialize the system event log.
Details
If the system event log fails to initialize, platform status and failure events are not captured.
Some management software do not report platform exceptions.
Action
Reboot the management controller or iDRAC. Cycle system input power. If problem persists
call support.
SEL1204
Message
LCD Message Unknown system hardware failure.
Details
Action
SEL1209
Message The platform event filter action failed.
Details
System policies or permissions may prevent the action from executing. If configured, the
system does not execute the action on a platform event (such as power down, cycle,
interrupt, and send alert).
Action
Review platform event configuration.
SEL1211
Message
Details
Action
SEL1300
Message No bootable media found.
Details
System setup displays the system boot order. The local video screen may also show
additional information. (IPMI sensor type code 1eh - offset 00h).
Action
Check system boot settings. Check if mass storage controller configuration settings are
applicable.
SEL1302
Message Non-bootable diskette detected.
Details
The disk in the drive is not formatted correctly or does not contain the necessary operating
system files.
Action
Replace diskette with a bootable disk.
An unknown system hardware failure detected.
If the system event log failed to initialize platform status and failure events are not
captured. Some management software will not report platform exceptions.
Re-configure system to minimum supported configuration. If issues persists, contact
support.
The time-stamp clock could not be synchronized.
The time stamp on system event log events may not correlate to the system time.
Cycle system input power. If problem persists, contact support.
121

Advertisement

Table of Contents
loading

Table of Contents