Input Control Command Table; Screen Command Table; Lamp Command Table - Sanyo PLC-XF1000 - 12000 Lumens Manual

PLC-XF1000 Expand Serial Command Functional Specifications

5.3 Input Control Command Table

Execute command
CF_INPUT_%1[CR]
CF_SOURCE_%1[CR]
CF_INPUT1_%1[CR]
CF_INPUT2_%1[CR]
CF_INPUT3_%1[CR]
CF_INPUT4_%1[CR]
CF_SYSTEM_%1[CR]

5.4 Screen Command Table

Execute command
CF_SCREEN_%1[CR]
CF_DZCENT _%1[CR]
CF_KEYSTONE _%1[CR]
CF_KYSTNMODE _%1 [CR]
CF_CEIL_%1[CR]
CF_REAR_%1[CR]
CF_VSCALE_%1[CR]
CF_VPOS_%1[CR]
CF_HSCALE_%1[CR]
CF_HPOS_%1[CR]

5.5 Lamp Command Table

Execute command
CF_LAMPH_%1[CR ]
CF_LAMPMODE_%1[CR]
CF_AUTOLAMPCONTRL_%1[CR]
Item
Select Input
Select Source of selected Input
Select Input1 and also set input source to %1
Select Input2 and also set input source to %1
Select Input3 and also set input source to %1
Select Input4 and also set input source to %1
Select System in Video input mode
Item
Select Screen size
Cancel Digital Zoom mode
Set Keystone correction
Set Keystone store mode
Set ON/OFF of Ceiling
Set ON/OFF of Rear
Set V Scale
Set V Position
Set H Scale
Set H Position
Reset total running time for each lamp
Select lamp mode (Full/Half)
Switch dimmer function levels of Normal/Auto/Eco
12/72
Item