Lamp Command Table; Sound Command Table; Setting Command Table; Other Command Table - Sanyo PLC-XD2200 - XGA Able Multimedia Projector Manual

PLC-XD2200/2600 Expand Serial Command Functional Specifications

5.5 Lamp Command Table

Execute command
CF_LAMPH_%1[CR]
CF_LAMPMODE_%1[CR]

5.6 Sound Command Table

Execute command
CF_VOLUME_%1[CR]
CF_MUTE_%1[CR]

5.7 Setting Command Table

Execute command
CF_LANG_%1[CR]
CF_MENUPOSITION_%1[CR]
CF_INPUTSEARCH_%1[CR]
CF_AUTOSETUPPCADJ_%1[CR]
CF_AUTOSETUPKEYSTONE_%1[CR]
CF_AUTOSETUP_%1[CR]
CF_BACKGND_%1[CR]
CF_DISP_%1[CR]
CF_LOGO_%1_%2[CR]
CF_CEIL_%1[CR]
CF_REAR_%1[CR]
CF_TERMINAL_%1[CR]
CF_STANDBYMODE_%1[CR]
CF_P-MANE_%1[CR]
CF_P-MANETIME_%1[CR]
CF_ON-STA_%1[CR]
CF_PTIMEMODE_%1[CR]
CF_PTIMER_%1[CR]
CF_PTIME_%1[CR]
CF_RCODE_%1[CR]
CF_KEYDIS_%1[CR]
CF_PJPINCODE_%1[CR]
CF_FANMODE_%1[CR]
CF_FANCONTROL_%1[CR]
CF_DELAYCTRL_%1[CR]
CF_CCAPTIONDISP_%1[CR]
CF_CCAPTIONCOLOR_%1[CR]
CF_FILTIMER_%1[CR]
CF_FILH_%1[CR]
CF_FDEFAULT_%1[CR]

5.8 Other Command Table

Execute command
CF_KEYEMU_%1[CR]
CF_MENU_%1[CR]
CF_POWER_%1[CR]
CF_FREEZE _%1[CR]
CF_VMUTE _%1[CR]
Item
Reset total running time of each lamp
Select Lamp mode
Item
Set Volume value
Control ON/OFF of Sound Mute
Select language for OSD
Move menu position.
Set up Input search function
Set Auto PC in Auto Setup
Set Auto Keystone in Auto Setup
Execute Auto Setup
Set screen mode for the case of no signal
Set Display function
Set Logo function
Set Ceiling function
Set Rear function
Set Terminal function
Set Standby Mode
Set Power management function
Set Power management time
Set Direct on Start function
Select P-timer mode
Execute P-timer
Set Countdown timer for P-timer
Select Remote Control Reception Code
Disable RC/Projector keys
Input PIN code to release PJ Lock
Select Fan mode
Select Fan control mode
Set Video delay control
Set channel of Closed caption
Set color of Closed caption
Set time when Filter warning OSD is displayed
Reset Filter used time
Set the value to Factory Default
Item
Behave the same as corresponding key of
projector top panel
Switch ON/OFF of each Menu.
Switch ON/OFF of Power.
Set Freeze function.
Set No show function.
11 / 71
Item