Thick Stock - Oki C130 User Manual

Keep media between 15% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
Layered
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn
Too slick, too coarse, or too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Orientation Face up
Driver
Media Type
Weight
Duplexing
DO NOT use thick stock that is
Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)
5-4
2
(24 lb bond) is referred to as thick stock. Test all
Tray 1 Up to 50 thick stock sheets, depending on
their thickness
Tray 2 Not supported
Thick 1 (91 to163 g/m
Thick 2 (164 to 209 g/m
91 to 209 g/m² (25 to 55.9 lb)
Not supported
2
)
2
)
Media Types