6Kqe4-1Mlc, 1 X Lc / 3 X Rj45 (Slot C) - GarrettCom Magnum 6KQE Installation And User Manual

Magnum 6KQE Managed Edge Switch Installation and User Guide
5.1.7

6KQE4-1MLC, 1 x LC / 3 x RJ45 (Slot C)

The 6KQE4-1MLC 4-port Fiber / Copper module provides one 100Mb
Multimode LC Fiber port and three 10/100Mb switched RJ-45 ports.
The 6KQE4-1MLC fiber port is a Small Form Factor (SFF) LC Multimode
connector used primarily in 100Mbps fiber-to-the-desktop links. When installed in a
Magnum 6KQE Series Switch, it supports fiber optic cable distances up to the IEEE-
standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-
duplex.
The compact size of the LC Connector reduces the size of wiring panels in
wiring closets while providing the advantage of "future-proof" fiber optic technology.
The cable end is a "plug-in" connector with both fiber strands terminated in
one housing that cannot be improperly inserted. Each port has an Activity (ACT) LED
indicating packets being received and a Link (LK) LED indicating proper connectivity
with the remote device when lit.
The 6KQE4-1MLC copper ports support Ethernet twisted pair segments of any
standard length. It is equipped with a three-port RJ-45 connector, and offers 10/100 full /
half-duplex auto-negotiating capability on each port. The RJ-45 connector is shielded to
minimize emissions and will allow both unshielded twisted pair (UTP) and shielded
twisted pair (STP) cable connections. When installed in a Magnum 6KQE Series
Managed Switch, the copper ports support the standard distance of 100m on each port.
www GarrettCom com . .
33
02/09