Din-Rail Mounting The Magnum 6Kqe - GarrettCom Magnum 6KQE Installation And User Manual

Magnum 6KQE Managed Edge Switch Installation and User Guide
The unit is mounted using the brackets as shown in the illustration above. The spacing
for the mounting screws into the supporting wall or panel is a rectangle 21.74 x 11.91 cm
(8.56 x 4.69 inches) center-to-center.
3.3.1

DIN-Rail Mounting the Magnum 6KQE

The Magnum 6KQE is designed for use in a "factory floor" industrial
environment. It is available with an optional DIN-Rail bracket to mount it securely in a
www GarrettCom com . .
metal factory floor enclosure, maintained
vertically for proper convection cooling of the
unit. The Magnum 6KQE requires one DIN-
Rail bracket for secure mounting. This may
be ordered as Model # DIN-RAIL-6KQ. See a
6KQE viewed from the side, at the rear, with
model DIN-RAIL-6KQ in place on the unit.
The DIN Rail bracket is mounted on
one of three available positions at the rear of
the 6KQE unit. Eight threaded holes are
provided on the rear of 6KQE for DIN-Rail
mounting purposes. The required four screws
are included with the DIN-Rail bracket, and
are no.4-40 X 5/16 PHIL. PAN Head.
To install the 6KQE with the DIN-Rail
bracket installed, hold the 6KQE in the side
21
02/09