Magnum 6KQE Managed Edge Switch Installation and User Guide
2.3
Managed Network Software for Magnum 6KQE
Magnum 6KQE comes with licensed MNS-6K Rel v4.1.4 software or MNS-6K-
SECURE Rel v14.1.4, which allow the user to configure the Magnum 6KQE as a
Managed Switch and implements security features and other software enabled features.
(NOTE: Magnum 6KQE managed switch will work with MNS-6K Rel
v4.1.4 firmware or higher version only, or MNS-6K-SECURE v14.1.4 firmware or
higher version only. Using any earlier MNS-6K versions will not support the 6KQE
hardware)
For additional information about MNS-6K, see the Magnum MNS-6K
Software User guide in pdf format, a separate document normally accessible via your
ftp://ftp.garrettcom.com/
web-browser, at
or FTP client program at
user : m6kuser
password : m6kuser
All MNS-6K software information, and the documentation related to MNS-6K and MNS-
6K-SECURE software, can be accessed at GarrettCom's FTP site.
Alternatively, for the latest documentation and information, or needed
GarrettCom's MIBs for SNMP, visit
www.GarrettCom.com/techsupport/index.htm#software
Magnum MNS-6K info.
For interactive training software which shows basic and advanced info about
the Magnum MNS-6K management software and for a useful tool for first time users,
Magnum MNS-6K Operator Training
visit
You may also email:
www GarrettCom com
.
ftp.GarrettCom.com
info@GarrettCom.com
.
using
.
for further information.
10
02/09
and look for the