6Kqe4-2Mmrj, 2 X Mtrj / 2 X Rj45 (Slot C); 6Kqe4-3Mmrj, 3 X Mtrj / 1 X Rj45 (Slot A, Slot C) - GarrettCom Magnum 6KQE Installation And User Manual

Magnum 6KQE Managed Edge Switch Installation and User Guide
standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-
duplex.
Each port has an Activity (ACT) LED indicating packets being received and a
Link (LK) LED that indicates proper connectivity with the remote device when lit.
The 6KQE4-1MMRJ copper ports support Ethernet twisted pair segments of
any standard length. It is equipped with a three-port RJ-45 connector, and offers 10/100
full / half-duplex auto-negotiating capability on each port. The RJ-45 connector is
shielded to minimize emissions and will allow both unshielded twisted pair (UTP) and
shielded twisted pair (STP) cable connections. When installed in a Magnum 6KQE Series
Managed Switch, the copper ports support the standard distance of 100m on each port.
5.1.5

6KQE4-2MMRJ, 2 x MTRJ / 2 x RJ45 (Slot C)

The 6KQE4-2MMRJ 4-port Fiber / Copper module provides two 100Mb
Multimode MTRJ Fiber ports and two 10/100Mb switched RJ-45 ports. (see also Section
5.1.4 for additional information)
5.1.6

6KQE4-3MMRJ, 3 x MTRJ / 1 x RJ45 (Slot A, Slot C)

The 6KQE4-3MMRJ 4-port Fiber / Copper module provides three 100Mb
Multimode MTRJ Fiber ports and one 10/100Mb switched RJ-45 port. This module
option occupies parts of Slot "A" and Slot "C". (see also Section 5.1.4 for information)
www GarrettCom com . .
32
02/09