Table of Contents
Advertisement
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
5. HARDWARE INFORMATION
Introduction
This chapter provides information on hardware specifications, pinouts for the Ethernet cable, pinouts for port connectors, and
pinouts for the cable adapters.
5.1 Hardware Specifications: TERMINAL
Physical
Size (In.) WxDxH
Weight
Temperature
Humidity
Power Supply
Power Consumption
Cables Included
Terminal Emulation
Emulations
Character matrix
Screen size
Page length
Cursor
Modes
Color modes
Communication Ports
Network port
Local printer ports
Serial baud rates
Data format
Serial handshake
Communications options
5.2 Hardware Specifications: SERIMUX
Attribute
Operating temperature
Storage temperature
Humidity
Power supply External
Power consumption
Operating system
SDRAM
Flash memory
19x18.4x1.75
23.3 lbs.
0°~38°C operating, -30°~60°C storage
17% to 96% non condensing
Auto -ranging 90-262 VAC, 47-63Hz
60W (max), <25W (standby)
Powercord (IEC320)
VT52, VT100, VT220, Console ANSI, PC TERM, TVI910+/925, WY-50+, WY-60, WY-100, WY-
120, WY-325, PCG Alpha
7x12 dot matrix in 10x16 cell with 3 dot descenders
80x25
1, 2, or 4 screens (multiple screen page length reduces maximum number of possible telnet
sessions)
Blink or steady, block or underline
Full duplex, half duplex, block mode, half block mode
16 foreground and 16 background colors
One RJ45 10Base-T Ethernet port
One DB25F Parallel and one DB9M RS232 port
50 to 115,200 bps
7 or 8 data bits with or without parity, 1 or 2 stop bits
XON/XOFF, XPC, and hardware DTR
Single RS232 server connection, or up to 16 Ethernet telnet sessions to predefined IP addresses.
Both serial and Ethernet connections can not be used concurrently.
40°F to 120°F (5°C to 50°C)
-20°F to 140°F (-29°C to 60°C)
10% to 90% non-condensing
100 - 240VAC, 50/60 Hz, 1.0A (max)
DC input: 0.8A/5VDC, 4.5 W (typical), 8W (max)
Linux Hard Hat embedded
64 megabytes
8 megabytes
68
Value
Advertisement
Table of Contents
