Table of Contents
Advertisement
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
Using the terminal program, send the binary firmware file using "1K Xmodem" protocol.
7.
8.
After successful transmission the SERIMUX will automatically restart after few seconds. If not, either power down the
RACKMUX and power it back ON (or just press the "System Reset" button (page 30)) and press [Enter[.
If the firmware update failed or was interrupted for any reason, power cycle the SERIMUX (or see page 30) to reset the SERIMUX
to default settings) and repeat the procedure beginning at step 4.
Figure 28- Last confirmation before firmware update
Figure 29- File transfer in progress
32
Advertisement
Table of Contents
