Table of Contents
Advertisement
NTI UNIMUX SERIES USB KVM SWITCH
Help Mode
To enter Help Mode press the <F1> key from the Command Mode menu (on page 17).
Help Mode displays a list of commands with a short explanation of their function. These lists are organized in pages for each
mode (i.e. COMMAND, EDIT, and SEARCH). The following options enable the user to quickly obtain information on any
command
.
Function:
View the previous page of help
if available
View the next page of help
if available
Exit HELP and return to previous
mode
F3- Display Information
To display information about a selected port, pressing the <F3> key from within the Command Mode main menu will cause a
window to open. The window will show the name of the port and its position in the system structure, level by level. This is most
useful when cascading switches (for Cascading see page 33).
This means that the CPU connected through this port is actually connected through Port 5 of the master switch (Level 1), and
through port 3 of the slave connected to port 5 (Level 2).
Keystroke:
Page
Up
Page
Down
Esc
An example of this structure might be
LEVEL 1 : PORT 5
LEVEL 2 : PORT 3
See Figure 27 below.
USER 1
USER PORTS
UNIMUX
MASTER
CPU PORT5
USER PORTS
UNIMUX
LEVEL 2
CPU PORTS
CPU PORT3
Figure 27- Information provided by the F3 command
25
LEVEL 1
SLAVE
CPU
Advertisement
Table of Contents
