Table of Contents
Advertisement
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
Disconnect the administrator or a user with administrative privileges
Action (from Keypad)
1.
Press DISCON
2.
Press ADMIN
3.
Press ENTER
Login a user to the administrator main menu
Action (from Keypad)
1.
Press ADMIN
2.
Press PORT
3.
Enter port number (00 by
default)
4.
Press USER
5.
Enter user number
6.
Press ENTER
The "Administrator main menu" will be displayed on the serial device connected to the specified port if:
– the administrator is not logged in;
– the specified user has administrative privileges, is enabled, and is not logged in;
– the specified port is accessible to the user;
– the specified port is not otherwise already connected and the port type is "User".
Login user to a port
Action (from Keypad)
1.
Press USER
2.
Enter the user number
3.
Press PORT
4.
Enter the port number
5.
Press ENTER
The initial user screen will be displayed on the serial device connected to the specified port if:
– the specified user is enabled, and is not logged in at another port;
– the specified port is accessible to the user;
– the port is not otherwise already connected and the port type is "User".
Reaction of SERIMUX
-
The LED "Discon" will illuminate.
-
The port 0 LED will be illuminated, the other port LEDs will be OFF.
-
The LED "Admin" will illuminate.
-
If command is successful the "Admin","Port","Discon".,"User" LEDs will illuminate
together. They will turn OFF after 30 seconds or when any other key is pressed.
-
The message: "Disconnecting administrator now" will be displayed by the terminal
application running on the former administrator port.
Reaction of SERIMUX
-
The LED "Admin" will illuminate. The port 0 LED will be illuminated, the other port LEDs will
be OFF.
-
The LED "Port" will illuminate.
-
The corresponding port LED will illuminate, the other port LEDs will be OFF.
-
The LED "User" will illuminate.
-
The corresponding port LED will illuminate
-
If the command is successful the "Admin","Port","Discon".,"User" LEDs will illuminate
together. They will turn OFF after 30 seconds or when any other key is pressed.
-
The administrator main menu (Figure 8, page 12) will be displayed on the terminal
application running on the administrator port.
Reaction of SERIMUX
-
The LED "User" will illuminate.
-
The port 0 LED will be illuminated, the other port LEDs will be OFF.
-
The corresponding port LED will illuminate
-
The LED "Port" will illuminate
-
The corresponding port LED will illuminate, the other port LEDs will be OFF.
-
The User main menu will be displayed on the terminal application on the user port: (see
Figure 22 on page 27 )
-
If the command is successful the "Admin","Port","Discon".,"User" LEDs will illuminate
together. They will turn OFF after 30 seconds or when any other key is pressed.
34
Advertisement
Table of Contents
