Table of Contents
Advertisement
NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH
F3- Display Information
To display information about a selected port, pressing the <F3> key from within the Command Mode main menu will cause a
window to open (see below). The window will show the name of the port and its position in the system structure, level by level.
This is most useful when cascading switches (see Cascading- page 37).
The image above indicates that the CPU connected to this port is actually connected
through port 1 of the master switch (Level 1), and through port 6 of the slave connected
to the master switch port 1 (Level 2).
(See Figure 18.)
19
USER 1
USER PORTS
UNIMUX
MASTER
CPU PORT1
USER PORTS
LEVEL 2
CPU PORT6
Figure 18- Port information- system structure
LEVEL 1
UNIMUX
SLAVE
CPU PORTS
CPU
Advertisement
Table of Contents
