Local Keyboard Commands; Table 6- Local Keyboard Commands In Native Mode - Network Technologies SERIMUX-TERM-CS-16/8 Installation And Operation Manual

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

4.3 Local Keyboard Commands

Table 6 lists local keyboard commands in the terminal's native mode.

Table 6- Local Keyboard Commands in Native Mode

Key Sequence by keyboard Style
Command
Toggle CAPS LOCK on/off
Toggle NUM LOCK on/off
Put terminal in SETUP mode
Partially reset terminal, including communication unlock
keyboard, turn off all print modes
Send break
*1
Toggle between block and full-duplex modes
Print Screen formatted
Turn auxiliary print mode on/off
Turn monitor mode on/off
Turn status line display on/off
Speed scrolling rate
Slow scrolling rate
Home cursor and clear page
Display page 0
Display page 1
Display next page (or active other window)
Display previous page (or active other window)
Toggle between split screen
*5
Toggle Session 0
*6
Toggle Session 1
*6
Toggle Session 2
*6
Toggle Session 3
*6
Toggle Session 4
*6
Toggle Session 5
*6
Toggle Session 6
*6
Toggle Session 7
*6
Toggle Session 8
*6
Toggle Session 9
*6
Toggle Session A
*6
Toggle Session B
*6
Close the active Session by Local Terminal
*1. To MODEM port only when configured as data port: has no effect on AUX port.
*2. [BREAK] = [PAUSE] pressed together with [CTRL].
*3. [SYS REQ] = [PRINT SCREEN] pressed together with [CTRL].
*4. If screen is split.
*5. Splits screen at line 12.
*6. Only active at Ethernet mode ON.
*4
*5
and full screen format
*6
Enhanced PC
CAPS LOCK
NUM LOCK
ALT ESC
ALT PAUSE
BREAK
*2
SHIFT BREAK
PRINT SCREEN
SHIFT SYS REQ
*3
CTRL SHIFT 1 (kpd)
CTRL
CTRL SHIFT
CTRL SHIFT
CTRL SHIFT HOME
CTRL 0kpd
CTRL 1kpd
PAGE DOWN
PAGE UP
CTRL SHIFT –kpd
ALT F1
ALT F2
ALT F3
ALT F4
ALT F5
ALT F6
ALT F7
ALT F8
ALT F9
ALT F10
ALT F11
ALT F12
CTRL SHIFT. Kpd
45