Advertisement
3. Connect a CAT5 cable from the "OUT" port on each Host Adapter to a "CAT5" port on the PRIMUX KVM
Matrix Switch.
4. Connect the Terminating Plug (supplied with Host Adapter) to the "IN" port on each Host Adapter.
WARNING: Never connect the PRIMUX Host Adapter, User Station, or Matrix
!
Switch to an Ethernet card, Ethernet router, hub or switch or other Ethernet
RJ45 connector of an Ethernet device. Damage to devices connected to
the Ethernet may result.
NOTE: HA-SUN-MTX Host Adapters require the insertion of a Terminating Plug (included) into the "IN" port on the Host Adapter.
Be sure to insert this plug.
5. Connect the user keyboard and mouse to the proper "DEVICES" port(s) (USB or PS/2) on the PRIMUX-UZR User Station. (USB type
devices are shown in the following image.)
6. Connect the user monitor to the "MONITOR" port on the User Station.
Cable to CPU
Terminating
Plug (Supplied)
Rear View of PRIMUX-UZR User Station
Rear View of PRIMUX-UZR User Station
5VDC
USB
2A
Devices
RS232
+
USB
USB Keyboard
Mouse
(Rear View)
CAT5 Cable
to PRIMUX Switch
N TI
P S/2
R
N ET WO R K
1275 Da nner Dr
Devices
T EC HNO L OG IES
Aurora, O H 44202
IN C O R PO RA T ED
w ww .ne tw orkte chinc.com
SUN
M ouse Kybd
Devices
Cat5
4
CAT5 Cable
to Matrix Switch
Tel:330-5 62-7 070
Fax:330-562-1999
M onitor
VGA
Multi-Scan
Monitor
Cable to CPU
(Rear View)
Advertisement
