Removing The Riser-Card Assembly - Lenovo ThinkServer RS110 Type 6435 Hardware Maintenance Manual

Removing the riser-card assembly

To remove the riser-card assembly, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cord and
3. Remove the server from the rack and place it on a flat, static-protective surface.
4. Remove the cover (see "Removing the cover" on page 60).
5. Disconnect any cables from the adapters in the riser-card assembly.
6. If the riser-card assembly is an optional PCI-X riser-card assembly, disconnect
7. Grasp the riser-card assembly at the front and rear edges and lift to remove it
8. If you are instructed to return the riser-card assembly, follow all packaging
88
ThinkServer RS110 Types 6435, 6436, 6437 and 6438: Hardware Maintenance Manual
on page 57.
all external cables.
the riser-card power cable from the riser-card assembly.
from the server. Place the riser-card assembly on a flat, static-protective
surface.
instructions, and use any packaging materials for shipping that are supplied to
you.