Needle/Thread Exchange Mode - Brother SKiTCH 888-R00 Operation Manual

7
While lightly holding down the bobbin, continue
guiding the thread through the slit. Then, cut the
thread with the cutter.
8
Reattach the bobbin cover.
9
Hold down (Accept button).
 The Accept button LED goes off, and the Needle/
thread exchange mode is exited.
Winding/Installing the Bobbin

Needle/thread exchange mode

While the machine is in this mode, the Threading position
button, Thread cutter button, "Start/Stop" button and
Bluetooth button are locked in order to prevent the needle
from moving by accident. By using this mode when changing
the needle, threading the machine with the upper thread or
installing the bobbin, you can safely install or replace the
needle.
Hold down the Accept button to enter the Needle/thread
exchange mode. (The "Start/Stop" button LED lights steadily
in orange, and the Accept button LED blinks.)
In this mode, each press of the Accept button switches the
presser foot between its raised and lowered positions.
While the machine is in the Needle/thread exchange mode,
hold down the Accept button to exit the mode.
21