Needle Penetration; Embroidering Start/End; Trim And Pause - Brother BE-0901E-AC-PC Instruction Manual

Chapter 5 Editing Embroidery Data

Needle Penetration

Chooses whether or not the needle pevetration positions are displayed.
1. Select [Needle Penetration] from View menu.
Before selecting

Embroidering Start/End

Displays start and end points as "S" and "E" on the screen respectively.
If points "S" and "E" are identical, "E" has priority over "S".
1. Select [Embroidering Start/End] from View menu.
Before selecting

Trim and pause

Displays the position of the trim code and the pause code.
Trim is displayed by X and pause is displayed by
1. Select [Trim and pause] from the View menu.
5-8
W1008Q
W1010Q
.
→
W1012Q
BE-0901E-AC-PC• BE-1201B-AC-PC
After selecting
W1009Q
After selecting
W1011Q
W1013Q