Switch; Queuemap - NetComm NCT240 Manager User Manual

NetComm NCT240 Management Guide

SWITCH:

This chapter will guide user how to configure the NCT240 switch features.
help Display command list
? Display command list

queuemap

vlan Setting VLAN
portvlan Setting port based vlan group
mac
8021_x 802_1x protocol settings
igmpsnoop igmp configuration
dhcprelay
eth The Ethernet port settings
looptest The loop setting
exit Return to upper level
Queuemap
This command display system related physical queue map and set a degree to a
physical queue.
Syntax: queuemap <show | set <priority> <queue>>
Command usage:
BAS/switch>queuemap
The system's priority level to physical queue mapping
Usage:
queuemap <show| set>
show
set Map a priority level to a physical queue.
The system's priority level to physical queue mapping
switch command list
Display the system's priority level to physical queue mapping.
queuemap command
Release 1.0
54