System; Daisycontrol - NetComm NCT240 Manager User Manual

NetComm NCT240 Management Guide

SYSTEM:

These are the commonly used commands that belong to the sys (system) group of
commands as the figure 2. You can input "help" or "?" for help.
BAS/sys>help
help Display command list
? Display command list

daisycontrol

The management of daisy chain
update Update system version
info Show general system information
user Setup user information
reboot Reboot the system
snmp
server The device's service status and port numbers information
syslog Log the system status and exception
time The system's current time
date The system's current date
timeserver The system's time server
alarm The recorded system alarm
exit Return to upper level
daisycontrol
syntax: daisycontrol <show|setdevice|settarget|tsetslavenum|tshowslavenum>
show
setdevice
settarget
setslavenum
showslavenum
SNMP information
sys command
Display the settings of daisy chain management.
Set the local device ID.
Set the target ID.
Set the max slave number.
Show the max slave number.
Release 1.0
38