Arp; Set - NetComm NCT240 Manager User Manual

NetComm NCT240 Management Guide
Command usage:
BAS/ip>show
ixp0 ip addr:
mac addr:
gateway:
net mask:
eth0 ip addr:
mac addr:
gateway:
net mask:

Arp

Syntax: arp <show | flush>
show – displays the ARP table
flush – remove all of the entries from the ARP table
Command usage:
arp <show|flush>
arp show <device ID>
arp <flush>
*** Device IP : uplink = eth0 , MGMT = ixp0

Set

Syntax: set <ip| netmask| mac>
ip –set the management ip address
netmask –set the management subnet mask
mac –set the management mac address
192.168.1.1
00:aa:aa:aa:aa:aa
0.0.0.0
255.255.255.0
192.168.0.1
00:05:ca:00:04:10
0.0.0.0
255.255.255.0
Figure 29：show command
Release 1.0
59