NetComm NCT240 Management Guide
Command usage :
BAS0/sys>daisy
The management of daisy chain.
Usage:
daisycontrol <show|setdevice|settarget|tsetslavenum|tshowslavenum>
show
setdevice
settarget
setslavenum
showslavenum
Update
Syntax: update <system|setting|backup>
system Update the system into new version.
setting Update parameters setting.
backup Backup the config files (ADSL/vcprofile) into remote .
command usage :
BAS0/sys>update
usage:
update <system|setting|backup>
system Update the system into new version.
setting Update parameters setting.
backup Backup the config files (ADSL/vcprofile) into remote .
Display the settings of daisy chain management.
Set the local device ID.
Set the target ID.
Set the max slave number.
Show the max slave number.
Release 1.0
39