802.1X; Igmp Snooping - NetComm NCT240 Manager User Manual

NetComm NCT240 Management Guide

802.1x

Syntax: 802_1x <show|portmode|enable|disable|portenable|portdisable|config|timer>
show -
Enable - Enable 802.1x protocol
disable - Disable 802.1x protocol
portmode - Set portmode on special ports
portenable - Turn on IEEE 802.1X on special ports.
Portdisable - Turn off 802.1X on special ports.
Config - config radius settings.
timer - timer set of 802.1X protocol.
Command usage
802_1x <show|portmode|enable|disable|portenable|portdisable|config|timer>
802_1x show <port range>
802_1x <enable>
802_1x <disable>
802_1x portmode <portlist> <portmode>
802_1x portenable <port range>
802_1x portdisable <port range>
802_1x config <radiusserverIP> <serverport> <authport> <NasIP>
<aucNasIdentifier> <sharedkey>
802_1x timer <quietPeriod> <txPeriod> <suppTimeout>
<serverTimeout> <reAuthMax reAuthPeriod>

IGMP snooping

Syntax: igmpsnoop <show|set|enable|disable|fastleave>
show - Display the IGMP snooping setting.
set
enable - Turn on IGMP snooping.
disable - Turn off IGMP snooping.
fastleave - onfig IGMP fastleave settings.
Showentry - show the igmp table entry.
Display IEEE 802.1X settings.
- Set the IGMP snooping VPI/VCI/VID/PRI.
Release 1.0
56