Dhcp Relay, Option 82; Eth - NetComm NCT240 Manager User Manual

NetComm NCT240 Management Guide
Command Usage:
igmpsnoop <show|set|enable|disable|fastleave>
igmpsnoop <show>
igmpsnoop set <VPI(0~4095)> <VCI(0~65535)> <VID> <Priority>
igmpsnoop <enable> Turn on IGMP snooping.
igmpsnoop <disable>
igmpsnoop fastleave <enable>|<disable>
igmpsnoop <showentry>

DHCP relay, option 82

Syntax:
dhcprelay <show|enable|disable|server>
show - show settings and status of dhcp relay.
enable - Turn on DHCP relay option 82.
disable - Turn off DHCP relay option 82.
server - Set a DHCP server IP address .
Command usage:
dhcprelay <show|enable|disable|server>
dhcprelay <show>
dhcprelay <enable>
dhcprelay <disable>
dhcprelay server <ip:xxx:xxx:xxx:xxx>

Eth

Syntax: eth <show| speed| enable| disable>
show – display the Ethernet port settings
speed – set the Ethernet port(s) connection speed
enable – Turn on the specified Ethernet port
disable – Turn off the specified Ethernet port
Release 1.0
57