Table of Contents
Advertisement
NetComm NCT240 Management Guide
This chapter introduces the command line interface and lists the available
commands.
It is divided into 7 topics:
1. System:- Deal with system configuration and maintenance.
2. ADSL:- Introducing and configuring ADSL parameters.
3. Status :- Display the system status
4. Switch:- Deal with Switch functions, such as activates and configures IGMP,
RSTP and other protocol parameters. (NOTE: some of the functions describe in
this topic is still under development).
5. IP:- Deal with IP (Internet Protocol) parameters configuration.
6. Statistics:- Deal with Error performance and statistic counters.
7. Config:- Deal with system parameters and display settings.
After login, help command can be accessed at any time. Help command can be
accessed by typing "help" or a "h". Help command lists all the available commands
that are accessible to the user. The following is a screenshot of the system.
BAS0>help
help
Display command list
?
Display command list
< sys >
< adsl >
< status >
< switch >
< ip >
< statistics >
< config >
exit
Return to upper level
Figure 1 showed all the commands under root directory. User can access different
directory by typing the corresponding directory name. For example, to enter system
directory, just type "system" or simply "sys". To return to parent directory, just type
"exit". To end CLI session, type "end" under root directory.
Figure 1: Help menu under root directory
Release 1.0
36
Advertisement
Table of Contents
