Table of Contents
Advertisement
NetComm NCT240 Management Guide
ADSL:
This chapter explains how to configure NCT240 system's ADSL ports. It also
covers how to configure virtual channels and virtual channel profiles.
A profile is a table that contains a list of pre-configured ADSL settings. Each
ADSL port has one profile assigned to it. The profile defines the latency mode and
upstream/downstream latency delay maximum and minimum upstream/downstream
rates, the target upstream/downstream signal noise margins, and the maximum and
minimum upstream/downstream acceptable noise margins of all the ADSL ports that
have this profile. You can configure multiple profiles, including profiles for
troubleshooting.
help
Display command list
?
Display command list
enable
Turn on the specified ADSL ports
disable
Turn off the specified ADSL ports
profile
Display, create, modify, delete, or copy an ADSL line profile
name
linediag
set,get line diagnostics
vcprofile
display, create, modify, delete a virtual channel profile
alarmprofile
Display, create, modify, delete, or copy an ADSL line alarmprofe
pvc
Display, create, modify, and remove a PVC setting
exit
Return to upper level
Enable
Syntax: enable <port>
enable an ADSL port
Set the name of the port
adsl command
Release 1.0
47
Advertisement
Table of Contents
