Muratec Fax Machine Installation Manual page 83

Printing a communication result
Your machine can print the individual communication result in the list of Comm.
Result.
1
Press
JOB REVIEW & COMM CANCEL
2
Select "Comm. Result" and then press [Enter].
3
Select the command you want to print and
press [Detail]. The will show:
LCD
Note: Press [Detail] again to return to the
previous display.
4
Press [List].
The communication result for that command
will be printed.
To print all communication results, that is, an activity journal, press
[Report].
Note: You can set your machine to print an activity journal automatically. See
"Setting the Activity journal" on page 3.40 for more detail.
View the reserved printing jobs for out-of-paper
reception
You can confirm the reserved printing jobs for out-of-paper reception.
Note: For more information of out-of-paper reception, see page 3.8.
To see the reserved printing jobs:
1
Press
JOB REVIEW COMM CANCEL
&
Note: The number next to "Out-of-paper Rx
Wait" signifies how many printing jobs
for out-of-paper reception are reserved.
If the number is "000", it means there
are no reserved jobs. Your machine can
store up to 250 out-of-paper receptions
in its memory.
.
, ,
MENU G
.
2
Select "Out-of-paper Rx" and then press
[Enter]. The list of Out-of-paper Rx will
appear.
It will be indicated by assigned numbers, time
when the document was received, and remote
location's names or numbers.
Note: The assigned number identifies the
order in which the documents were received by your machine.
3
Use the cursor key to scroll through items.
If you wish to exit this mode, press
View the reserved copy jobs
You can confirm the reserved copy jobs.
To see the reserved copy jobs:
1
Press
JOB REVIEW & COMM CANCEL
Note: The number next to "Reserved Copy"
signifies how many copy jobs are
reserved. If the number is "000", it
means there are no reserved jobs.
2
Select "Reserved Copy" and then press
[Enter]. The list of Reserved Copy will appear.
It will be indicated by assigned numbers, time
when operated for the copy job, and state for
each job.
Note: The assigned number identifies the
order in which the copy jobs will be
done.
3
To exit this mode, press .
RESET
Advanced fax
.
RESET
.
3.31