Muratec Fax Machine Installation Manual page 162

Just in case
< Common >
What you see on the
LCD
Call for service
Cannot register Macro key.
Please use Soft key.
Carriage error
Drum cartridge
is almost empty 500
Not avail. with ADF
Please call service
Please correct error first
Please wait
Printing
Replace
drum cartridge
5.14
What it means/What to do
The scanner lamp is dim or inoperable.
Make repeated copies to help evaporate any
internal moisture. If that doesn't resolve the
problem, call your authorized Muratec dealer or
Muratec Customer Support.
You cannot register "Last Job" feature to the
Macro key. Assign it to a Soft key.
The mirror carriage of your machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
Your machine can print about 500 more sheets.
It will count down the number of sheets which
can be printed. Please contact your authorized
Muratec dealer soon to purchase a new drum
cartridge if you don't already have one.
Note: According to the resolution and document
type, your machine may become not to print
before the number of sheets on the
LCD
to be "0".
You tried to use the function which cannot be
used in . Use the glass.
ADF FBS
The printer unit of your fax machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
You pressed the Start key when an error has
occurred. Correct the error.
Your fax machine's printer is either warming up
or busy. Please wait until the fax is finished
printing and then re-try your command or opera-
tion.
The command you're trying to enter requires the
use of the printer, which is already in use. Wait
for the fax to finish printing, then try again.
Your drum cartridge doesn't work.
Your machine cannot print until it is replaced
with a new drum cartridge.
Replace it.
Scanner in use
Toner bottle
is empty 50
Toner is empty
Too many characters
becomes
Too many locations
Too many steps
OK to register?
# of stored page: XXX
Keep these pages?
The command you're trying to enter requires the
use of the scanner, which is already in use. Wait
for the fax to complete the scan, then retry the
desired command.
Your machine is almost out of toner.
About 50 more sheets can be printed and your
machine will count down the number of sheets
which can be printed. Please contact your autho-
rized Muratec dealer soon to purchase a new
toner bottle if you don't already have one.
Note: According to the resolution and document
type, your machine may become not to print
before the number of sheets on the
LCD
to be "0".
Your machine is out of toner.
Your machine cannot print until it is replaced
with a new toner bottle.
Replace it.
You attempted to enter too many numbers or
other characters in the current operation.
Press [Cancel] to delete the extra characters,
then try again. You may wish to review the oper-
ation's appropriate instructions.
You tried to enter department code more than
100. Your machine can store up to 100 depart-
ment codes.
You tried to enter too many steps for a macro.
You can enter up to 60 steps into a macro key.
Press [YES] to tell your fax to register these
steps, or press [NO] to cancel the registering.
During scanning of the document, the memory
overflowed. Press [YES] to tell your fax to keep
as many pages in memory as possible, or press
[NO] to delete from memory all pages stored
during this operation (but not previous opera-
tions).
becomes