Muratec Fax Machine Installation Manual page 115

Autodialing while using the
PIN
Note: The following instructions presume you understand how to set and use your
machine's autodialer. If you need to review, see pages 3.11–3.23.
If you chose "Mode 1" — the goes in
PIN
In Mode 1, before autodialing a number for the first time, you must add the
the stored one-touch key or speed-dial number. Here's how:
1
Begin by creating or changing an entry in the
autodialer. (See pages 3.11–3.23, if necessary.)
While you're setting this up, the machine asks
you to enter the . The shows:
PIN LCD
2
Select "PIN" and press [Enter].
3
Use the numeric keypad to enter the four-digit
passcode.
4
Press [Enter].
5
Use the numeric keypad to enter the desired
, up to eight characters in length.
PIN
6
Press [Enter] to save the .
PIN
Note: If you press [Enter] without entering
the , the machine beeps, indicates "Invalid Number" on the
PIN
then returns to step 5.
Now you may autodial the number as usual.
Important: While in Mode 1, any autodialer numbers you use must include
PIN
the . This also applies to autodialer numbers used with batch
PIN
transmission (see pages 3.26–3.28) or programmable one-touch keys
(see pages 3.54–3.60).
Note: If you select either Mode 1 or Mode 2 and will be using batch transmission,
you must store the access code for the remote unit within the appropri-
PIN
ate batch box. (See "Performing batch transmission while using the
mask," page 3.64.)
mask
to
PIN
LCD
PIN
If you chose "Mode 2" — as you autodial, load the code
In this mode, you don't have to add the
enter the manually each time you autodial:
PIN
1
Dial the number as you normally would, using the autodialer.
2
Use the numeric keypad to enter the
3
Press [Enter].
Your machine dials the number.
Note: If you select either Mode 1 or Mode 2 and will
be using batch transmission (see pages
3.26–3.28), you must store the
appropriate batch box. (See "Performing batch transmission while using the
mask," page 3.64.)
PIN
Dialing from the numeric keypad while using the
If you've specified Mode 1 — use "star" power
1
Enter the phone number, then press the
* ("star") key and enter the
The always goes last.
PIN
For example, to dial 19725550911 with a
and
"12345678", enter 19725550911*12345678:
2
Press . The
START PIN
play, and your machine dials the desired phone
number.
If you've specified Mode 2 — the machine guides you
1
Enter the phone number as usual.
2
Press . The
START LCD
3
Use the numeric keypad to enter the
4
Press [Enter].
Your machine dials the number.
to the autodialer setting. Instead, you
PIN
.
PIN
access code for the remote unit within the
PIN
PIN
.
PIN
of
PIN
disappears from the dis-
shows:
.
PIN
Advanced fax
mask
3.63