Muratec Fax Machine Installation Manual page 123

Image rotate transmission
Default setting: ON.
When this feature is activated, if you set letter-sized document in the sideways
direction( ), the image will be sent rotated by 90°.
1
Press , , 0, 3, [Enter].
MENU J
2
Choose desired setting you want using the cur-
sor key. Then press [Enter].
3
Press to return to the standby mode.
RESET
Setting the confirmation stamp
Default setting: OFF.
You can set your fax machine so that it will automatically place a small blue ink
stamp mark on the front of each original document that it successfully scans.
Important: Turn off this feature if you're sending documents you don't want the
fax to stamp.
1
Press , , 1, 4, [Enter].
MENU J
The shows your fax's current setting:
LCD
2
Select "On" or "Off" using the cursor key.
3
Press [Enter] to save the setting.
4
Press to return to the standby mode.
RESET
Fax settings
3.71