Muratec Fax Machine Installation Manual page 32

Advanced Copy
To make copy with repeat:
1
Press .
MENU
2
Select "Repeat" using the cursor key, and then
press [Enter].
Note: The Auto Reduce/Enlarge is selected
automatically.
3
Select the desired repeat modes using the cur-
sor key.
Note: The number of documents repeated can be 2, 4 or 8.
4
If you want to change the recording paper size for combining, proceed to next
step. Otherwise, skip to step 6.
5
Press [Paper] to select the paper size, and then press [Enter].
6
You can insert the separator lines between repeated images. If you want to
insert the separator lines, proceed to next step. Otherwise, skip to step 8.
7
Press and then press [Line] to print the
NEXT
separator lines. To cancel the separator lines,
press [Line] again.
Note: The width of the line can be changed.
(See page 2.28.)
8
If you want to change the layout, proceed to next step. Otherwise, skip to step
12.
Note: Use this function, when you set the reduction/enlargement ratio by
yourself.
9
Press [Layout], the
LCD
Note: If [Layout] does not appear on the
press until it appears.
NEXT
10
Select the layout using the cursor key.
11
Press [Enter] to save the layout setting.
12
Press [Enter] to save the setting.
Note: If [Enter] does not appear on the
Note: To cancel the setting of the combine function, press
2.12
will show:
,
LCD
, press .
LCD NEXT
CLEAR
13
The Repeat icon will be displayed on the
14
Set the documents.
Note: Set the documents in the same direction as you see on the
5.
If you set your documents in the
Press
START
printed.
If you set your document on
Press
START
Then set the next page of your document, then press [Start].
After all your documents are scanned, press [Exit].
.
.
LCD
:
ADF
. After all the documents in the
ADF
glass:
FBS
after setting the first page of your documents on the
in step
LCD
are scanned, the copies will be
glass.
FBS