Multi Pad Editing - Yamaha PSR-A2000 Owner's Manual

Digital workstation
Hide thumbs Also See for PSR-A2000:
Table of Contents

Advertisement

Multi Pad Editing

From the MULTI PAD EDIT display, you can rename, copy or delete a Multi Pad.
1
Press the MULTI PAD CONTROL [SELECT] button to call up the Multi Pad Bank
Selection display, then select a Bank to be edited.
2
Press the [8 ▼] (EDIT) button to call up the MULTI PAD EDIT display.
3
Select a particular Multi Pad to be edited by pressing any of the [A], [B], [F] and [G]
buttons.
4
Edit the selected Pad as desired.
[1 ▼]
NAME
[3 ▼]
COPY
[5 ▼]
DELETE
For details on the naming and deleting procedures, refer to the Basic Operations section (pages 28–29).
Copying the Multi Pad
Press the [3 ▼] button in step 4 above.
1
Select the Multi Pads to be copied by using the [A], [B], [F] and [G] buttons, then press the [7 ▼]
2
(OK) button.
The selected Multi Pad(s) is copied to the clipboard.
3
Select the destination location by using the [A], [B], [F] and [G] buttons. If you want to copy the
selected Pad(s) to another bank, press the [8 ▲] (UP) button to call up the Multi Pad Bank Selec-
tion display, select the desired bank, press the [8 ▼] (EDIT) button, then select the destination.
Press the [4 ▼] (PASTE) button to execute the Copy operation.
4
Changes the name of each Multi Pad.
Copies the Multi Pad(s). See below.
Deletes the selected Multi Pads.
PSR-A2000 Owner's Manual
4
159

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents