Multi Pad Editing (Multi Pad Creator)
134
PSR-S900/S700 Owner's Manual
Multi Pad Editing (Multi Pad Creator)
1
Press the MULTI PAD CONTROL [SELECT] button to call up the Multi
Pad Bank selection display, then select a Bank to be edited on the
USER drive.
2
Press the [8 †
† ] button to call up the [MULTI PAD EDIT] display, then
†
†
select a Pad to be edited by pressing any of the [A], [B], [F], and [G]
buttons.
The number above the Pad name corresponds
to the MULTI PAD [1]–[4] buttons.
3
Edit each of the Multi Pads as desired.
• Naming
Press the [1 † ] button then change the name of each Multi Pad (page 76).
• Copying
Press the [3 † ] button, select the Multi Pad to be copied, select the desti-
nation location, then execute the Copy operation by pressing the [4 † ]
button (page 74).
• Deleting
Press the [5 † ] button then delete the unnecessary Multi Pad (page 75).