Using The Multi Pad Synchro Start Function; Using Chord Match - Yamaha Tyros4 Owner's Manual

Using the Multi Pad Synchro Start Function

While holding the MULTI PAD CONTROL [SELECT] button, press one of the MULTI PAD CONTROL [1]–[4] buttons
to put the Multi Pad playback in standby. The corresponding button will flash in red. You can even play two, three, or
four Multi Pads at the same time.
The Multi Pad currently set to standby will start playing when you play back a Style, press
any note on the keyboard (when [ACMP] is off), or play a chord with your left hand (when
[ACMP] is on). If you put the Multi Pad in standby during Song/Style playback, pressing
any note on the keyboard will start the Multi Pad playback at the top of next bar.
When two or more Multi Pads are in standby, pressing one of them simultaneously starts
all Multi Pads that are set to standby.
To cancel Synchro Start, while holding the MULTI PAD CONTROL [SELECT] (or
[STOP]) button, press one of the [1]–[4] buttons. Pressing the MULTI PAD CONTROL
[STOP] button once cancels Synchro Start of all buttons.

Using Chord Match

Many of the Multi Pad phrases are melodic or chordal and you can have these phrases automatically change chords along
with the chords you play with your left hand. When the [ACMP] is on or LEFT part is on, simply play a chord with your
left hand and press any of the Multi Pads—Chord Match changes the pitch to match the chords you play. Keep in mind
that some Multi Pads are not affected by Chord Match.
In this example, the phrase for Pad 1 will be transposed into F major before playing back. Try out other various chord
types while playing the Multi Pads.
Advanced Features
Refer to the Reference Manual on the website, Chapter 4.
Multi Pad creating (Multi Pad Creator):
Multi Pad editing:
Chord Section
[DIGITAL RECORDING]  [C] MULTI PAD CREATOR
Multi Pad Bank Selection display  [8 ] (EDIT)
Tyros4 Owner's Manual
4
65