Mixer; Editing Filter Parameters (Filter) - Yamaha PSR-A5000 Reference Manual

9
9

Mixer

Editing Filter Parameters
Editing EQ Parameters (EQ)
Editing Effect Parameters (Effect)
• Editing and Saving the Effect settings
Editing Effect Parameters
• Editing and Saving the Chorus/Reverb
Editing Pan/Volume Settings
Editing Master Compressor Settings (Compressor)
Block Diagram
The Owner's Manual covers the basic procedure of using the Mixer function. This Reference Manual provides more
detailed information on each display (or function) of the Mixer display called up via [MENU]  [Mixer].
The "Panel"-"Song" Part Selection tabs at the top of the Mixer display let you adjust the sound for each
corresponding part, while "Master" lets you make overall sound adjustments for the entire instrument.
NOTE
Knobs and sliders appear on the setting displays only when the relevant parameters are available.
For a visual indication of the signal flow and configuration of the Mixer, refer to the Block Diagram on

Editing Filter Parameters (Filter)

This function modifies the tonal characteristics (brightness, etc.) of the sound by cutting the output of a specific
frequency portion of the sound. This is not available when you select "Master" from among the tabs at the top of the
Mixer display.
Resonance
Cutoff
(Filter)............................................................................................ 95
................................................................................................... 96
.......................................................................................... 98
................................................................................. 99
(Chorus/Reverb)......................................................................... 100
settings................................................................. 100
(Pan/Volume).......................................................................... 100
......................................................................................................................... 103
Allows you to adjust the Resonance effect
with the "Cutoff" parameter to add further character to the sound.
Determines the brightness of the sound for each part by adjusting the cutoff frequency
............................................................ 101
(page 47) for each part. This can be used in combination
PSR-A5000 Reference Manual
page 103.
9
(page 47).
95