Editing Filter Parameters; Editing Tune Parameters - Yamaha Clavinova CVP-601 Reference Manual

Editing FILTER Parameters

[A] PART
[D]/[I] HARMONIC
CONTENT
[E]/[J] BRIGHTNESS

Editing TUNE Parameters

[A]/[B]/ PORTAMENTO
[F]/[G] TIME
[C]/[H] PITCH BEND
RANGE
[D]/[I] OCTAVE
[E]/[J] TUNING
[1] – TRANSPOSE
[3]
This will be displayed only if SONG CH 1-8 or SONG CH 9-16 is selected
for the part. Toggles between the two channel displays: SONG CH 1-8 and
SONG CH 9-16. For details, refer to chapter 9 in the Owner's Manual.
Allows you to adjust the resonance effect
Determines the brightness of the sound for each part by adjusting the cut-
off frequency (page 13).
Portamento is a function that creates a smooth transition in pitch from the
first note played on the keyboard to the next. The Portamento Time deter-
mines the pitch transition time. Higher values result in a longer pitch
change time. Setting this to "0" results in no effect. This parameter is
available when the selected keyboard part is set to Mono.
Determines the range of the PITCH BEND for each keyboard part (when
a pedal is assigned to this function;
"12" with each step corresponding to one semitone.
Determines the range of the pitch change in octaves, over two octaves up
or down for each keyboard part.
Determines the pitch of each keyboard part.
Allows you to set transposition for overall sound of the instrument
(MASTER), Song playback (SONG), or the keyboard pitch (KBD),
respectively.
(page 13) for each part.
page 78). The range is from "0" to
CVP-601 Reference Manual
9
73