Editing Filter Parameters - Yamaha DGX-670 Reference Manual

Voice, etc. Allows you to re-select the Voices for each keyboard part or each part (channel) of the
Style or Song. Press the [1 ]–[8 ] buttons to call up the Voice selection page
for the part. After selecting the desired Voice, press the [EXIT] button to return to the
Mixer display.
When the Panel part is selected, the same operation allows you to re-select the Style,
Song or Audio file (instead of the Voice) for the corresponding part.
Panpot Determines the stereo position of the selected part (channel).
Volume
Determines the volume of each part or channel, giving you fine control over the bal-
ance of all the parts.

Editing Filter Parameters

This function modifies the tonal characteristics (brightness, etc.) of the sound by cutting the output of a specific
frequency portion of the sound.
Move the Cursor on the display by using the Cursor buttons [][][E][F], and then use the Data dial or
the [1 ]–[8 ] buttons to edit parameters.
Harmonic
Allows you to adjust the Resonance
Content
Brightness Determines the brightness of the sound for each part by adjusting the Cutoff Fre-
quency
When a GM Song is selected, only a Drum Kit Voice can be selected for channel 10 (in the Song Ch9-16 page).
For a Style or Song channel, calling up a rhythm/percussion Voice (Drum Kit, etc.) will replace the channel settings
with those for the new Voice. In such a case, the original settings may not be restored even if you re-select the original
Voice. To restore the original sound, select the same Style or Song again without carrying out the Save operation.
(page 15).
(page 15) for each part.
DGX-670 Reference Manual
8
67