Page Separation And Length Reduction - Ricoh Aficio MP C4500 Facsimile Reference Manual

Reception

Page Separation and Length Reduction

If the size of a received document is longer than the paper loaded in the machine,
each page of the document can be split and printed on several sheets, or reduced
and printed on a single sheet.
3
For example, this function splits the document if the document length is 20 mm
(0.79") or longer than the paper used. The document is reduced if it is less than
20 mm (0.79"). When a document is split, an asterisk (p) is inserted at the split
position and about 10 mm (0.39") of the split area is duplicated on the top of the
second sheet.
Note
❒ Your service representative can customize this function with the following
settings:
• Reduction
• Print split mark
• Overprinting
• Overprinting length
• Guideline for split
❒ You can adjust the overprinting and reduction lengths within the following
ranges:
• Overprinting length: 4 mm (0.16"), 10 mm (0.39"), 15 mm (0.59")
• Guideline for split: 5-155 mm (5 mm steps)/0.2-6.1" (0.2" steps)
168