Setting Attributes - Brother GeoBook NB-80C Instructions Manual

.
5.
• Inner Radius. The inner radii of the star represent the radii of an
ellipse that touches each of the star's inverted angles. The left box
specifies the horizontal measure, and the right box specifies the
vertical measure, in point increments. The default is 40 points (about
0.56 inches); the minimum size is 1 point (about 1/72 of an inch);
and the maximum size is 288 points (4 inches).
Click on Create Star. Drawingplaces the star in the drawing area.
Click on Close.
Setting Attributes
This section describes how to set the attributes for a graphic object, such as a
line, rectangle, rounded rectangle, ellipse, arc, or star.
Area attributes are qualities such as the fill tone, shading, flu
pattern, and drawing mode.
Line attributes are qualities such as the tone, line pattern, thickness,
style, and arrowheads.
Text attributes control items such as the font, size, tone, line
spacing, paragraph spacing, indents, tabs, and borders.
Background tone used with area attributes can be used to create
custom tones.
Tone and patterns can add emphasis and appeal to a graphic object. You can
-define tonesand pattem_'fOr_an object's area attributes
(the fill
area in¢ide
an object) and its/_e attributes (the border of an object, or a line object).
.
Using the Attributes tool bar -
The Attributes tool bar is along the left-hand side of your window.
Ill'-"
,--,
m
I N,.--t I
=__N=!
i
i
IIT=I
Area Fill tool
Area Shading tool
Area Pattern tool
Line Tone tool
Line Shading tool
Line Width tool
Text Tone tool
Text Shading tool
Drawing 136