Selecting Objects - Brother GeoBook NB-80C Instructions Manual

3. Hold the Drag button and drag the line to a new location.
I_ To add an arrowhead at the end of a line:
Press CTRL while
drawing a line. An arrowhead appears at tbepoint where
you ended the line.
OR
1. Select Line Attributes from the Attributes menu. The Line Attributes dialog
box appears.
2. Click on the Arrowhead style.
3. Click on the Arrowhead at End check box and click on Close. An
arrowhead appears at the poim wbere you ended the line.
Selecting Objects
You can select objects by clicking on them with any of the drawing tools.
When you select an object, handles appear around it.
Toselect an unfilled
objec_ you must click
on a line or curve on
the objecL
To select or deselect an object:
Using one of the drawing tools, click on the object you want to select.
Handles tippeaar around the object.
OR
TO des_I_cL click'-ln-'any-"_art of the drawing area where there is no object.
Handles in the dra_ng d_apl_a_.
_--il_ To select several objects:
Selectingseveral I." Click on the pointer tool.
objects is useful when
you want to move or
change the tone of
several objects that are
next to each other.
2. Move the pointer above and to one side of the objects you want to select.
Hold down the Select button and drag across the area you want to select.
As you move the pointeg, a box with a dotted outline appears.
3. Continue to drag and stretch this box over the objects you want to select;
then release the Select button. As you enclose objects, their bandles appear
_ To select several objects that are not next to each other:
. To deselect indvidual 1. Using any of the drawing tools, place the on-screen pointer on the first
objects in the group, hold object you want to select. Hold down CTRL and click the Select button.
down CIRL and click on Handles appear around the object.
them a_n.
2. Continue to hold down CTR1 while clicking on each of the other objects
you want to select, one by one. Handles appear around each object.
Drawing 131