Printing Your Selected Photos - Epson Stylus Photo RX600 User Manual

Printing Your Selected Photos

Once you've selected your photos, follow these steps to start printing:
1. Press the u and d buttons to highlight
buttons to choose the type of paper that is loaded in the printer. (If you're not
sure about the paper type, see the table on page 87.)
Note:
It's important to select the correct Paper Type setting for the paper you're using, or
the print quality may not be what you expect.
2. Press the u and d buttons to highlight
buttons to select the size of paper you've loaded.
3. Use the u and d buttons to highlight
to select one of the following:
BorderFree
With Border
Upper 1/2
: two photos per sheet
2-up
: four photos per sheet
4-up
: eight photos per sheet
8-up
: 20 photos per sheet; the photo number and date are also printed
20-up
Greeting Card
4. Use the u and d buttons to highlight
the l and r buttons to choose
5. If you like, you can make further changes before printing. Use the u and d
buttons to choose the options listed below, then use the l and r buttons to
make changes to the settings:
: Choose
Filter
Auto Correct: P.I.M.
Matching or Exif Print settings (these options are automatically selected
when your pictures contain P.I.M. or Exif data).
the brightness, contrast, and saturation of your photos.
: one photo per sheet, borderless; fits the photo lengthwise
: one photo per sheet, with borders around the edges
: one photo on the top half of the sheet
: one photo per sheet, for the front of the greeting card
Normal
to print your photos with a sepia (brown) tone.
Sepia
and
Exif
, then press the l and r
Paper Type
, then use the l and r
Paper Size
, then use the l and r buttons
Layout
, then use
Resolution
, , or
Photo Best Photo
use your camera's PRINT Image
PhotoEnhance

Printing Your Selected Photos

.
adjusts
85