Selecting One Photo; Selecting A Set Of Photos - Epson Stylus Photo RX600 User Manual

Selecting One Photo

You can select a photo and print one or more copies of it on a
page using a variety of layouts.
1. Press the
Memory Card
2. Use the u and d buttons to highlight
Note:
For Basic Print mode, see your How To Copy and Print book.
3. Use the l and r buttons to choose
4. Use the l and r buttons to navigate to the photo you want to print, then use
the u and d buttons to choose the number of copies you want to print.
5. Press the
OK
6. Continue with "Printing Your Selected Photos" on page 85 to finish laying
out your photos and setting up your print job.

Selecting a Set of Photos

You can select two or more photos and print them as a group
using a variety of layouts. If you've selected more photos than can
fit on a page, the printer automatically prints additional pages as
needed using the same layout.
1. Press the
Memory Card
2. Use the u and d buttons to highlight
3. Use the l and r buttons to choose
4. Use the l and r buttons to navigate to the photo you want to print, then
use the u and d buttons to choose the number of copies for that photo.
5. Repeat step 4 for each photo you want to print, then press the
6. Continue with "Printing Your Selected Photos" on page 85 to finish laying
out your photos and setting up your print job.
Note:
If you selected the wrong photo, you can deselect it from the list of selected
photos by changing its number of copies to zero as described in step 4.
button.
button.
button.
.
Custom Print
, then press the
Select Print
.
Custom Print
, then press the
Select Print
Printing From a Memory Card
button.
OK
button.
OK
button.
OK
83