Replacing Ink Cartridges; Checking The Ink Supply - Epson Stylus Photo RX600 User Manual

If you don't see any improvement after cleaning three or four times, check the
solutions beginning on page 131. You can also turn the Stylus Photo RX600 off
and wait overnight—this allows any dried ink to soften—and then try cleaning
the print head again.
Caution:
When you don't turn on your Stylus Photo RX600 for a long time, the print quality can
decline. It's a good idea to turn it on at least once a month to maintain good print quality.

Replacing Ink Cartridges

When the red
When the red
When you print, you'll see a message on your LCD screen telling you which
cartridge is low or empty.
When a cartridge is more than six months old, you may need to replace it if
printouts don't look their best. If the quality doesn't improve after cleaning and
aligning the print head, you can replace the cartridge even if the red

Checking the Ink Supply

To check your ink supply, do the following:
1. Press the
Setup
2. Press the u and d buttons to select
You see a graphic with the amount of ink available in each cartridge:
(Cyan),
C LC
(Yellow).
Y
3. When you're done checking the ink levels, press the
When your ink starts getting low, make sure you have replacement cartridges
available. You can't print if a cartridge is empty.
light flashes, one or more ink cartridges are low on ink.
!
light stays on, you need to replace the cartridge(s).
!
button to enter setup mode.
(Light Cyan), (Magenta),
M
, then press the
Ink Levels
(Light Magenta), and
LM
OK
Replacing Ink Cartridges
light is off.
!
button.
OK
(Black)
B
button.
123