Printing Your Selected Photos; Selecting The Type, Size, Layout, And Quality - Epson Stylus Photo RX600 User Manual

Printing Your Selected Photos

Once you've selected your photos, you need to select your print settings. Follow
the steps in these sections:
"Selecting the Type, Size, Layout, and Quality" below
"Selecting the Correct Paper Type" on page 91
"Selecting Special Print Settings" on page 92
"Saving and Reusing Print Settings" on page 93
"Restoring Default Settings" on page 93

Selecting the Type, Size, Layout, and Quality

1. Press the u and d buttons to highlight
buttons to choose the type of paper that is loaded in the printer. (If you're not
sure about the paper type, see the table on page 91.)
Note:
It's important to select the correct Paper Type setting for the paper you're using, or
the print quality may not be what you expect.
2. Press the u and d buttons to highlight
buttons to select the size of paper you've loaded.
3. Use the u and d buttons to highlight
to select one of the following:
BorderFree
With Border
Upper 1/2
2-up
4-up
8-up
20-up
Greeting Card
90
Printing and Scanning Without a Computer
: one photo per sheet, borderless; fits the photo lengthwise
: one photo per sheet, with borders around the edges
: one photo on the top half of the sheet
: two photos per sheet
: four photos per sheet
: eight photos per sheet
: 20 photos per sheet; the photo number and date are also printed
: one photo per sheet, for the front of the greeting card
, then press the l and r
Paper Type
, then use the l and r
Paper Size
, then use the l and r buttons
Layout